Polar Air Silent Air Industrial Plus 10HP V4 38CFM 1- Phase 2-Stage 120 Gal. Vertical Stationary Electric Air Compressor-W/ Pressure Lube Pump , Isolator Pads, Belt Tensioner, Continuous Run, Auto Drain
CompareAvailable on backorder
$5,487.00
Available on backorder
Riser
Our pump mounting plate riser is designed to raise the pump allowing 360-degree air flow from the flywheel to cool the pump oil reservoir. Pump mount risers also allow air to flow under the pump for maximum cooling.
Continuous Run/Dual Control
Dual Control
Dual control allows users to run the unit with automatic start/stop control, or the optional continuous run setting during high duty cycle peak demand periods.
Optional Settings
The optional continuous run setting allows the pump to cool internally and save the electric motor and magnetic switch from excessive frequent starting and stopping of the electric motor.
Pressure Lube
Pressure Lubrication is the second type of lubrication systems. This system is more technically advanced and a far more precise method to deliver oil to critical parts of the pump, resulting in longer pump life. The oil is pumped through an oil filter and into the pump where it is then recycled and reused. Since the oil pump is delivering the oil more efficiently the viscosity of the oil is less critical than with a splash system. In the air compressor industry, it is typically more costly to upgrade to pressure lubrication systems. *Our high efficiency manufacturing facility 0to the tank. With this radiator, we target outlet air to the tank within 10 degrees of ambient temperature.

Silent Air
Noise Reduction
Our Patented Silent Air system works by dissipating compressor intake noise through a series of noise cancellation plates, reducing DBA ratings by up to 50%. Silent air compressors operate at a normal conversation level in comparison to traditional compressors that operate at the level of a police siren.
Air Filtration
This low-profile system not only makes the compressor quieter but also adds four levels of air filtration.
Silent Air Technology
- Significantly lowers the risk of hearing damage
- Decrease in employee turnover
- Enhances workplace satisfaction
Tensioner
Piston
Piston compressors come optional with a belt tensioner. This belt tensioner allows you to easily and quickly tighten your belts. These tensioners also have a double bolt tension device that allows you to keep the belts in perfect alignment. No pry bars needed to tighten your belts!
Rotary
All Rotary Screw belt driven models 5HP – 20HP include an automatic spring-loaded belt tensioning device. This keeps a steady pressure for optimal belt tension.
Auto Drain
Operation
A dual timer electric auto drain is a device designed to expel moisture and water from the air receiver tank.
Interval Setting Feature
It has an adjustable interval setting feature that allows you to set the device from 1 to 45-minute drain cycles. You can also set the timing of how long you want the drain to stay open.
Muffler Included
Our premium series compressors Include an air muffler for quiet dispensing of water.
Smart Air
Smart Air Features
- On-Demand Variable Speed
- Automatic Continuous Run
- Low-Oil Shut Down
- Variable Speed Soft Start
- Maintenance Scheduler
- Weekly Start/Stop Scheduler
- High/Low Air Settings
Monitoring Features
- Oil Pressure
- Water Temperature
- Running Hours
- Oil Temperature
- Tank Air Pressure
Smart Air
In addition to those features, Smart Air technology also calculates duty cycle so you can see cost savings daily, weekly and monthly. Smart Air Compressors allow you to have up to 50 Smart Air compressors via a simple ethernet cable and will automatically synchronize and operate using the auto demand technology. This patented technology also ensures energy waste is virtually eliminated, and the lifespan of each compressor is maximized. Giving you the freedom and flexibility to increase your compressed air needs, while controlling costs, as your business grows.
Belt Drive
Our belt driven compressors are driven by V belts that allow you to adjust the pump speeds by changing pulley sizes.
Piston Compressor Warranty
Eaton Compressor, backs all our piston air compressors with the best extended warranty in the industry. With our extended warranty, we don’t ask you to buy a service plan, we just ask that you purchase and use our oil and filters. This ensures the correct oil and filters are being used, to keep your piston air compressor running for years to come. We have 3 different extended warranty options to choose from so you can pick what best suits your company’s needs. Make sure to research and ask questions, when comparing warranty information. Be certain, when you buy, that you are getting a full warranty. Our trained service and support team is ready to assist you if you ever need them and we carry a full line of air compressor replacement parts.
Motor
These units have name brand OPD (open drip motors) on them, all of which carry a five-year warranty. All of our motors are low RPM (1750 rpm), versus the higher RPM motors (3450 RPM) used on many competitive units. 1750 RPM motors run much cooler than 3450 RPM motors, because of the higher torque factor. They also yield low harmonic distortion, provide much higher torque in cold weather starting and requiring less electricity under start up.
- Large 1-3/8” output shaft
- High quality ball bearings on the front and rear of the motor shaft
- Large starting and running capacitors15 Service Factor load. This means the motor can be pulled 15% over full load for more break horsepower
- Dynamically balanced armature for low vibration levels
Brands | Polar Air Compressor |
---|---|
HP | 10 |
Tank Size | 120 |
Voltage +/- 10% | 230 |
Phase | 1 |
Drive Type | Electric |
Tank Drain | Automatic |
Pump Type | PRESSURE |
CFM | 38 |
Silent Air | Y |
Smart Air | N |
Compressor Type | Piston |
Motor Type | ODP |
Tank Orientation | Vertical |
Duty Cycle | 0.6 |
Outlet Size | 1" |
Belt Count | 2 |
Pump Stage | 2 |
Pump Model | APP4V1043TP |
Pump Riser | Y |
Belt Tensioner | Y |
Mag Starter | Y |
Radiator | N |
Continuous Run | Y |
Peak Starting Amps | 270 |
CFM At Max PSI | 34 |
Pump RPM | 730 |
Motor RPM | 1740 |
FLA + 1.15 Service Factor | 52.9 |
Locked Rotor Amps | 270 |
Recommended Breaker | 60 |
Max PSI | 175 |
Crated Weight | 1110 |
Uncrated Length | 44 |
Uncrated Width | 31 |
Uncrated Height | 80 |
Crated Length | 48 |
Crated Width | 46 |
Crated Height | 87 |
Oil Capacity | 2 |
Oil U/M | Quarts |
Start Type | Fixed |
Estimated Pump Life (Hours) | 70000 |
Certifications | ETL,ASME,CRN |
Service Kit | FKIT008AWBS |
Brad Woodward c/o Brad’s Auto Body –
Very helpful staff, Fast production an a very high quality AMERICAN made product! Couldnt be happier! Thanks!!!!
Brad Woodward c/o Brad’s Auto Body –
Justin Trepper c/o JC Powder Coating –
This compress make my old IR compress feel like a toy. The whisper feature really works!
Justin Trepper c/o JC Powder Coating –
Mason Hopkins c/o Frozen Levels Farms –
Got this thing installed in our farm shop. Really quiet. We were going to move our old compressor outside because it was so noisy, but it quit entirely, so we got the 120 eaton. Big Difference. Won’t need to move this outside.
Mason Hopkins c/o Frozen Levels Farms –
Brandon Veillon c/o Veillons Powda Shop –
i am very satisfied with the customer support while ordering. The product itself exceeded all expectations. the silent air system works better than expected. im very happen with my purchase and would recommend this brand to anyone!!
Brandon Veillon c/o Veillons Powda Shop –
Ripley Tomlinson –
I just wanted to leave a review from my purchase. Everything was excellent, from the service to the product! I also want to give special credit to Jeff at the loading dock. He went above and beyond, service like no other I have experienced. My sales person was Megan and she was very knowledgeable and guided me through my purchase. Absolutely a five star experience. I wanted to make sure that these two people got credit for their hard work and service.
Ripley Tomlinson –
Vandi Smith –
I upgraded from the 5HP 120 gallon to the 10HP 120 gallon unit and its excellent in our Detail Shop! I have 6 detailers using this thing all day long! It hardly runs! Its very quiet! Megan was a pleasure to work with! We are very pleased with our purchase!
Vandi Smith –
Seth –
Very happy with new compressor a lot quieter than my old one
Seth –
Thomas Roehm –
My Eaton 10HP Quiet Air Single Phase Compressor works very well and it is definitely a lot quieter than my old compressor. I have been using it for weeks and have not had any issues. I am very happy with my purchase and highly recommend it to others in the market for new compressor!
Thomas Roehm –
Thomas Roehm –
I am very happy with this compressor. It works well and is way quieter than my old one. Company is very responsive as well.
Thomas Roehm –
Cameron Guernsey –
Very pleased with the quality of this compressor! We needed a new shop compressor to run air tools, paint and powder coat equipment. This 10hp 120 with the refrigerated air dryer was the perfect solution!
Cameron Guernsey –
Ingrid tomala (verified owner) –
EXCELLENT COMPRESSOR!!! Had to wait more than expected but Megan kept me posted! The compressor is very silent then others I have in the past. Love that I can have a conversation and be screaming. Will buy again for sure
Ingrid tomala –
Josh Ewing –
Compressor was packaged well upon receiving. Very well built and should serve its purpose in our new shop. Great quality!
Josh Ewing –
Zack G –
Sales team was great from the first phone call to the delivery. The compressor itself seems to be well built, and surprisingly quiet compared to other compressors i have owned. It is also huge compared to my old SpeedAir 60 gallon. makes the old one look like a toy. I have only had it working for a few weeks now but so far i’m 100% happy with it and the 58cfm air Drier.
Zack G –
Bruce –
I’ve had it a little over a month now. It’s very quiet for a piston compressor. It’s quiet enough that my 4 year old has been sleeping in my shop and he isn’t woke up by it kicking on. I bought this to replace a screw compressor that wasn’t being worked enough. I was a little worried if it wouldn’t keep up with my sand blasting and I’m pleasantly surprised. It’s had no problems whatsoever ever. I got the air dryer for it as well and I have zero issues with water for my blast cabinets. The compressor was delivered before my estimated ship date so that too was great. Over all I would for sure do business with them again and if I need anything for a compressor I will look at them first!
Bruce –
kevin Mutters –
Installed this beast recently and can’t believe the quietness and power it has. fast refill and great CFM. combined with a 58cfm dryer and so far it is amazing. Build quality seem top notch as was the shipping! Thanks Megan for making it so easy!
kevin Mutters –