
Polar Air Silent Air Industrial 7.5HP 3CYL Two Stage 1Ph 26CFM 80 Gallon Air Compressor w/isolator pads – Splash Lube Pump
SKU: P01ISXXS07V080YXXXX
$3,376.78
Silent Air™
Patented Noise Suppression System – Up to 50% Quieter
Silent Air Technology
This intelligent design achieves up to 50% quieter operation—with noise levels at or below conversational volume (each 10 dBA drop equals a 50% reduction to the human ear). Unlike enclosed cabinet systems, which are costly and restrict service access, our silencer is costeffective, easy to service, and doesn’t compromise accessibility.
Noise Reduction
Our Silent Air™ patented silencer system sets us apart as one of the quietest compressor brands on the market.
Air Filtration
Designed to reduce intake noise—the loudest source of compressor sound—this system
uses:
● Noise-reducing baffle plates
● High-capacity filter media
● Up to 1000% more filtration than standard setups
Motor
These units have name brand OPD (open drip motors) on them, all of which carry a five-year warranty. All of our motors are low RPM (1750 rpm), versus the higher RPM motors (3450 RPM) used on many competitive units. 1750 RPM motors run much cooler than 3450 RPM motors, because of the higher torque factor. They also yield low harmonic distortion, provide much higher torque in cold weather starting and requiring less electricity under start up.
- High quality ball bearings on the front and rear of the motor shaft
- Large starting and running capacitors15 Service Factor load. This means the motor can be pulled 15% over full load for more break horsepower
- Dynamically balanced armature for low vibration levels
Splash Pump
Operation
Splash lubrication systems work by using rod dippers that pass through the oil in the crankcase when the pistons are moving and splash the oil up onto the cylinders and pistons to lubricate them. Although this method is effective, it’s not precise. Parts of the pump may not be receiving enough oil. Where there is not enough oil, wear between critical components can become a costly issue… on the other hand too much oil can also be in issue as well.
Viscosity
Viscosity of the oil becomes important with splash method as well, if the oil is not thick enough it will not cling to the dippers as needed. So, although effective it is becoming an outdated method.
History
Traditional splash lubrication systems have been around since the first air compressor was produced.
Belt Drive | V-Belt Design
Power You Can Rely On
Unlike competitors using narrow, single A-width belts, our compressors feature a multi-belt drive
system with B and C-width belts. This design provides:
● More surface area for better grip
● Reduced belt tension, minimizing strain on motor and compressor bearings
● Lower noise and vibration, extending belt and system life
The result is a durable, efficient, and a low-maintenance drive system built for thousands of hours
of trouble-free use.
Piston Compressor Warranty
Eaton Compressor, backs all our piston air compressors with the best extended warranty in the industry. With our extended warranty, we don’t ask you to buy a service plan, we just ask that you purchase and use our oil and filters. This ensures the correct oil and filters are being used, to keep your piston air compressor running for years to come. We have 3 different extended warranty options to choose from so you can pick what best suits your company’s needs. Make sure to research and ask questions, when comparing warranty information. Be certain, when you buy, that you are getting a full warranty. Our trained service and support team is ready to assist you if you ever need them and we carry a full line of air compressor replacement parts.
| Brands | POLAR |
|---|---|
| HP | 7.5 |
| Tank Size | 80 |
| Voltage +/- 10% | 230 |
| Phase | 1 |
| Drive Type | Electric |
| Tank Drain | Manual |
| Pump Type | SPLASH |
| CFM | 26.00 |
| Silent Air | Y |
| Smart Air | N |
| Compressor Type | Piston |
| Motor Type | ODP |
| Tank Orientation | Vertical |
| Outlet Size | 3/4" |
| Belt Count | 2 |
| Pump Stage | 2 |
| Pump Model | APP3Y0732TR2 |
| Pump Riser | N |
| Belt Tensioner | N |
| Mag Starter | Y |
| Radiator | N |
| Peak Starting Amps | 210.00 |
| Pump RPM | 770.00 |
| Motor RPM | 1740.00 |
| FLA + 1.15 Service Factor | 38.90 |
| Locked Rotor Amps | 210.00 |
| Recommended Breaker | 50.00 |
| Max PSI | 175.00 |
| Uncrated Weight | 0.00 |
| Crated Weight | 703.00 |
| Uncrated Length | 39 |
| Uncrated Width | 25 |
| Uncrated Height | 75 |
| Crated Length | 49 |
| Crated Width | 46 |
| Crated Height | 87 |
| Oil Capacity | 1.60 |
| Oil U/M | Quarts |
| Start Type | Fixed |
| Estimated Pump Life (Hours) | 50000.00 |
| Certifications | ETL,ASME,CRN |
| Service Kit | FKIT008AWB |
| Battery Voltage | 0.00 |
| DBA | 0.00 |
| Max Ambient Temp (F°) | 0.00 |
| Max Inlet Temp (F) | 0.00 |
Polar Air Silent Air Industrial 10HP 38CFM 1-Phase 80 gal. Vertical Industrial Electric Air Compressor-W/ Pressure Lube Pump / w/ Isolator Pads 

















There are no reviews yet.