Polar Air Silent Air Industrial Plus 10HP V4 38CFM 1- Phase 2-Stage 80 Gal. Vertical Stationary Electric Air Compressor-W/ Pressure Lube Pump , Isolator Pads, Belt Tensioner, Continuous Run, Auto Drain
Polar Air Silent Air Industrial Plus 10HP V4 38CFM 1- Phase 2-Stage 80 Gal. Vertical Stationary Electric Air Compressor-W/ Pressure Lube Pump , Isolator Pads, Belt Tensioner, Continuous Run, Auto Drain - Image 2
Polar Air Silent Air Industrial Plus 10HP V4 38CFM 1- Phase 2-Stage 80 Gal. Vertical Stationary Electric Air Compressor-W/ Pressure Lube Pump , Isolator Pads, Belt Tensioner, Continuous Run, Auto Drain - Image 3
Polar Air Silent Air Industrial Plus 10HP V4 38CFM 1- Phase 2-Stage 80 Gal. Vertical Stationary Electric Air Compressor-W/ Pressure Lube Pump , Isolator Pads, Belt Tensioner, Continuous Run, Auto Drain - Image 4
Polar Air Silent Air Industrial Plus 10HP V4 38CFM 1- Phase 2-Stage 80 Gal. Vertical Stationary Electric Air Compressor-W/ Pressure Lube Pump , Isolator Pads, Belt Tensioner, Continuous Run, Auto Drain - Image 5
, , , , ,

Polar Air Silent Air Industrial Plus 10HP V4 38CFM 1- Phase 2-Stage 80 Gal. Vertical Stationary Electric Air Compressor-W/ Pressure Lube Pump , Isolator Pads, Belt Tensioner, Continuous Run, Auto Drain

(22 customer reviews)
POLAR

$4,289.45

Silent Air™

Patented Noise Suppression System – Up to 50% Quieter

Silent Air Technology

This intelligent design achieves up to 50% quieter operation—with noise levels at or below conversational volume (each 10 dBA drop equals a 50% reduction to the human ear). Unlike enclosed cabinet systems, which are costly and restrict service access, our silencer is costeffective, easy to service, and doesn’t compromise accessibility.

Noise Reduction

Our Silent Air™ patented silencer system sets us apart as one of the quietest compressor brands on the market.

Air Filtration

Designed to reduce intake noise—the loudest source of compressor sound—this system uses:

● Noise-reducing baffle plates

● High-capacity filter media

● Up to 1000% more filtration than standard setups


Pressure Lubrication Pump

Maximum Protection for Critical Components

Pressure lubrication reduces friction and internal wear by delivering a continuous flow of oil to each bearing point via a gear oil pump, keeping bearings cool and extending pump life. Each crankshaft and connecting rod is gun-drilled for precise oil flow, while a spin-on automotive-style oil filter ensures clean oil for maximum longevity. An analog pressure gauge allows operators to monitor oil pressure accurately, providing reliable performance and peace of mind.

100% Cast Iron Pump Features

Many compressors rely on aluminum components, which do not offer the same durability and rigidity as cast iron. All major components of our compressors are constructed from cast iron, including:


● Crankcase
● Cylinder heads
● Cylinders


● Connecting rods
● Crankshaft
● High-pressure piston

High Performance

Pressure Lubricated pumps feature a high-performance pressure lubrication system, delivering superior protection and longevity under demanding conditions. A gear-driven oil pump, mounted to the rear of the crankshaft, generates positive oil pressure, ensuring consistent lubrication throughout the system.

Rifle Drilled

All crankshaft and connecting rods are rifle-drilled, allowing direct oil flow to key wear points— including bearings and other high-friction components. A SPIN ON automotive-style oil filter provides clean, efficient filtration for optimal performance and simplified maintenance during oil changes.

Critical Components Coverage

Unlike splash-lubricated systems, pressure lubrication delivers oil precisely where it's needed, reducing friction, wear, and heat—especially in high-stress, continuous-duty environments. This is the most effective method for keeping your compressor running stronger, longer.

Optional Head Unloaders

Head unloaders are ideal for constant-run applications. They relieve the intake valve during operation, improving pump cooling and reducing overall wear under heavy workloads. This feature enhances reliability and extends the service life of the compressor in demanding environments. On our gas-powered compressors, continuous-run head unloaders provide decompression during engine startup, reducing load on the electric starter and ensuring smoother, more efficient starts.

Piston Rings

Our pumps utilize a four-ring piston design, featuring precision-engineered overlap rings that minimize compression loss and significantly reduce oil carryover. This configuration enhances sealing efficiency, improves overall pump performance, and supports long-term reliability under demanding operating conditions.

Gaskets

Our pumps feature high-quality, non–oil-absorbent gaskets designed to minimize oil leakage. This ensures a more reliable seal, reduces maintenance requirements, and contributes to the long-term efficiency and durability of the pump.

flywheel

Flywheels 5–25 HP

Our Eaton pumps feature heavy-duty cast iron flywheels designed to maximize energy efficiency and performance. The increased mass generates greater kinetic energy, reducing amp draw and lowering overall energy consumption. Each flywheel is equipped with multiple B-groove belts, providing a larger contact surface area to extend compressor belt life. Additionally, flywheels are engineered with optimized cooling fins to enhance compressor pump cooling capacity.

  1. 5 HP – 16” flywheel, (2) B-style groove belts, 6 large cooling fins
  2. 7.5 / 10 HP – 20” flywheel, (2) B-style groove belts, 9 large cooling fins
  3. 15 / 20 HP – 24” flywheel, (3) B-style groove belts, 6 large cooling fins
  4. 25 HP – 20” flywheel, (4) B-style groove belts, 9 large cooling fins

Piston and Connecting Rod

Rods1

  1. Cast Iron High-Pressure Pistons

    Must be cast iron for long life. Designed to withstand heavy loads, they prevent cylinder scoring and pump failure, unlike aluminum high-pressure pistons used by some competitors.


  2. CNC-Machined Solid Cast Iron Connecting Rods

    Provide maximum rigidity and strength for long-term reliability. Competitor rods often use aluminum, which is prone to failure.


  3. Replaceable Bearing Inserts & Wrist Pins

    Allow full rebuildability of the connecting rod assembly, extending pump life. The connecting rods are fully rebuildable and not throw-away, unlike many competitor designs.


  4. Low-Pressure Pistons (Two-Stage Pumps)

    Made from aluminum for balance and efficiency, as they operate under low stress (~45 PSI).

Rods2

  1. Advanced Piston Rings

    We use four rings instead of three, designed to overlap each other: two oil control rings remove excess oil on the downstroke, and two compression rings seal under compression to prevent blow-by. This design maximizes sealing, reduces oil carryover, and extends ring life.


  2. Superior Connecting Rod Design

    Maintains strength at the rod’s base, preventing catastrophic failure common in aluminum rods. At the crankshaft end—the point where aluminum rods commonly fail—cast iron provides the most reliable long-term performance.


  3. Rifle-Drilled Connecting Rod Oil Port

    Allows oil to travel through the crankshaft to the rifle-drilled passage in the connecting rod and up to the piston pin and bearing, ensuring continuous lubrication and extended component life.

Disc Valves

  1. CNC-Machined Concentric Ring (Disc) Valves

    Precision surface-ground for superior sealing, durability, and extended service life. Also known as concentric ring valves, this design is significantly more reliable than feather or fixed reed valves commonly used by competitors. Although more costly to manufacture, disc valves deliver greater longevity and consistent, trouble-free performance. Service is simple and efficient—remove the retainer, lift out the valve for inspection, and reinstall it within minutes. In contrast, reed valve systems require substantially more service time and are more prone to issues.


  2. Head Unloader Option

    All valves are engineered to support an automatic head unloader system. Head unloaders are only included on fully packaged electric units, while on gas-driven units, the unloader is included on all models. Recommended for electric units operating at 40% or greater duty cycle, head unloaders save energy, improve efficiency, reduce wear, and extend equipment life while protecting the electric motor and magnetic starter by minimizing repeated starting under load. The pilot valve works with a ball valve connected to it; under high duty cycle applications (over 40%), the ball valve can be opened to allow continuous-run operation. On electric units, the unloader works with the pilot valve to unload the compressor at preset pressure, holding the intake valve open to prevent compression while the piston continues cycling. This allows cool air to circulate through the cylinder, dissipating heat and reducing internal temperatures. On gas-powered continuous-run units, the head unloader reduces starting drag, improves ease of starting, lowers fuel consumption, and minimizes engine strain.

Oil Pump

  1. Oil Pump Bleeder Valve

    Allows for quick and efficient priming of the oil pump.


  2. Liquid-Filled Oil Pressure Gauge

    Provides clear, accurate oil pressure readings for easy monitoring during operation.


  3. Automotive-Style Gear Oil Pump

    Designed for reliability, this pump pressurizes the internal crankshaft bearings and the upper connecting rod assembly, delivering oil to critical wear points to improve bearing cooling and extend overall engine and pump life.


  4. Adjustable Oil Pump Regulator

    Enables precise oil pressure adjustment across varying RPM ranges.


  5. Automotive-Style Spin-On Oil Filter

    Effectively removes debris and contaminants from the oil, helping extend pump service life.

pressure

Cylinder Heads

  1. Solid Cast Iron Cylinder Heads

    We do not use aluminum cylinder heads due to their tendency to experience head gasket failures, and because most are equipped with reed-style valves that typically result in shorter service life. Our cast iron heads are engineered for maximum durability and extended performance. Tapped holes provide superior strength compared to aluminum heads, while cast iron maintains rigidity under demanding conditions. The disc valve design ensures a secure head gasket seal without the need for retorquing.


  2. Precision-Machined Disc Valve Design

    Allows for quick valve inspection and simplified maintenance. Recognized as one of the most reliable valve systems in the industry.


  3. High-Quality Disc Valves

    Designed for easy serviceability, long valve life, and dependable, trouble-free operation.


  4. Head Unloaders

    Compressors equipped with the head unloader option improve efficiency and extend electric motor life. When maximum tank pressure is reached, the preset pilot valve unloads the compressor, allowing the motor to continue running rather than repeatedly starting and stopping. This reduces amp draw by up to 60% while unloaded and minimizes electrical and mechanical wear. Head unloaders are also used on our gas-powered units to minimize load on the electric start system, increasing starter life and reducing fuel consumption.

Cylinder Construction

  1. Cast Iron Cylinders

    CNC-machined to maintain overall flatness and precise tolerances. The precision cylinder bore ensures concentricity, reducing oil carryover and supporting long-lasting piston performance.


  2. Deep Fin Cooling Fins

    Designed to maximize surface area for efficient cylinder cooling, extending pump life under high-duty cycle operation.


  3. 100% Cast Iron Construction

    No aluminum sleeves. Unlike aluminum, cast iron handles high-duty cycle compression efficiently. Many competitors claim cast iron but use aluminum beneath the paint—Eaton pumps are truly all cast iron.


  4. Deep-Bored and Threaded Holes

    Provide solid head retention and allow proper torque application, ensuring long-term durability of cylinder and head gaskets.


  5. Precision-Honed Cylinder Surfaces

    Every pump maintains measured cylinder honing, promoting easier break-in, reduced oil carryover, and longer piston ring life.

cylinder

Motor

These units have name brand OPD (open drip motors) on them, all of which carry a five-year warranty. All of our motors are low RPM (1750 rpm), versus the higher RPM motors (3450 RPM) used on many competitive units. 1750 RPM motors run much cooler than 3450 RPM motors, because of the higher torque factor. They also yield low harmonic distortion, provide much higher torque in cold weather starting and requiring less electricity under start up.

  • High quality ball bearings on the front and rear of the motor shaft
  • Large starting and running capacitors15 Service Factor load. This means the motor can be pulled 15% over full load for more break horsepower
  • Dynamically balanced armature for low vibration levels

Continuous Run/Dual Control Feature

Smart Energy-Saving Operation

Dual Control

Our dual control system offers greater operational flexibility. Choose between Auto Start/Stop Mode or Continuous Run Mode based on your compressor’s usage pattern:

● Auto Start/Stop is ideal when usage is 30% or less.
● Continuous Run is better when frequent cycling exceeds 30%.

Continuous Run Mode

The Continuous Run Mode decompresses the intake valves using a pilot valve with a preset PSI, reducing start-up stress on the motor. This prevents wear on the electric motor, centrifugal switch, magnetic starter, and cuts down on energy spikes—helping to lower your electricity bill. Additionally, when freewheeling (not compressing), the pump continues to cool internally, helping dissipate excess heat generated during compression and protecting the system from long-term wear.


Riser

Our pump mounting plate riser is designed to raise the pump allowing 360-degree air flow from the flywheel to cool the pump oil reservoir. Pump mount risers also allow air to flow under the pump for maximum cooling.


Auto Drain

Operation

A dual timer electric auto drain is a device designed to expel moisture and water from the air receiver tank.

Interval Setting Feature

It has an adjustable interval setting feature that allows you to set the device from 1 to 45-minute drain cycles. You can also set the timing of how long you want the drain to stay open.

Muffler Air Silencer Included

For quiet dispensing moisture from the air receiver.


Belt Tensioner

Smooth, Accurate, and Long-Lasting

Dual-Bolt Belt Tensioner

Our dual-bolt belt tensioner makes belt adjustments easier and more precise. This design ensures proper alignment while maintaining optimal belt tension, reducing wear and tear for longer belt life and enhanced serviceability. Using pry bars to tension your belts is no longer required.


Belt Drive | V-Belt Design

Power You Can Rely On

Unlike competitors using narrow, single A-width belts, our compressors feature a multi-belt drive system with B and C-width belts. This design provides:

● More surface area for better grip
● Reduced belt tension, minimizing strain on motor and compressor bearings
● Lower noise and vibration, extending belt and system life

The result is a durable, efficient, and a low-maintenance drive system built for thousands of hours of trouble-free use.


Piston Compressor Warranty

Eaton Compressor, backs all our piston air compressors with the best extended warranty in the industry. With our extended warranty, we don’t ask you to buy a service plan, we just ask that you purchase and use our oil and filters. This ensures the correct oil and filters are being used, to keep your piston air compressor running for years to come. We have 3 different extended warranty options to choose from so you can pick what best suits your company’s needs. Make sure to research and ask questions, when comparing warranty information. Be certain, when you buy, that you are getting a full warranty. Our trained service and support team is ready to assist you if you ever need them and we carry a full line of air compressor replacement parts.

SKU: P01PSXXP10V080VXXXX Categories: , , , , , Brand:
Brands

POLAR
HP

10
Tank Size

80
Voltage +/- 10%

230
Phase

1
Drive Type

Electric
Tank Drain

Automatic
Pump Type

PRESSURE
CFM

38.00
Silent Air

Y
Smart Air

N
Compressor Type

Piston
Motor Type

ODP
Tank Orientation

Vertical
Outlet Size

3/4"
Belt Count

2
Pump Stage

2
Pump Model

APP4V1043TP
Pump Riser

Y
Belt Tensioner

Y
Mag Starter

Y
Radiator

N
Peak Starting Amps

270.00
Pump RPM

730.00
Motor RPM

1740.00
FLA + 1.15 Service Factor

52.90
Locked Rotor Amps

270.00
Recommended Breaker

60.00
Max PSI

175.00
Uncrated Weight

780.00
Crated Weight

913.00
Uncrated Length

39
Uncrated Width

25
Uncrated Height

75
Crated Length

48
Crated Width

46
Crated Height

87
Oil Capacity

2.00
Oil U/M

Quarts
Start Type

Fixed
Estimated Pump Life (Hours)

70000.00
Certifications

ETL,ASME,CRN
Service Kit

FKIT008AWBS
Battery Voltage

0.00
DBA

0.00
Max Ambient Temp (F°)

0.00
Max Inlet Temp (F)

0.00

Based on 22 reviews

4.9 overall
20
1
1
0
0

Add a review

  1. William Quakenbush –

    First off, everything went smooth from the start. The staff was professional and answer all questions. The air compressor is awesome!! It is soooo quiet and smooth operating. It’s nice if your close to the compressor to be able to think, talk and w/o losing your hearing;} Great job goes out to your staff and also to a great product.

    William Quakenbush –

  2. Nathan Weddington –

    No complaints, great experience

    Nathan Weddington –

  3. Jeff Williams –

    A Beast of a compressor but quieter than the 5hp that it replaced. Best warranty and highest hp single phase compressor that I found after doing much research. Couldn’t be more pleased with this purchase.

    Jeff Williams –

  4. Charles –

    Awesome. Very nice and very quiet compared to my old 7hp

    Charles –

  5. Timothy Johnson –

    I just got the compressor hooked up…I have to say WOW!! I love it. I have the whisper 100. So much quieter than my AR 80 gallon. No comparison. I love it.

    Timothy Johnson –

  6. Jake McDaniels –

    This compressor has exceeded our expectations. This is quieter tan expected. We don’t run out of air anymore and love the auto drain feature. This compressor quickly refills to keep the business running smooth.

    Glad we decided to go with Eaton Compressor.

    Buy Back Wheels Inc.

    Jake McDaniels –

  7. Ross Verticchio –

    Very satisfied with Eaton’s product. A well built quality product that speaks for itself. The staff deserves six stars. They are professional, polite, and knowledgeable people who are enthusiastic about their job!

    Ross Verticchio –

  8. Brandon Page –

    The sales team was friendly and helped me find the right compressor for my shop. This compressor is high quality, built well and truly is quiet especially when compared to other manufacturers. I love that I can carry on a conversation with someone near the compressor without having to yell to hear each other. It is also very efficient and builds pressure a lot quicker than any compressor I have used before so it’s not running long periods of time to build back up. I have no complaints about this compressor and I will definitely use more of their products in the future.

    Brandon Page –

  9. Eric B. –

    This is a great USA made air compressor. It is well built and runs so smooth. I was worried about it being damaged during shipping, but it was packaged well and was delivered in great shape. This compressor is quieter and puts out 3 times the air of my last one. I can finally use my sand blaster and have plenty of air! Matt, Megan, and the whole team are very knowledgeable and are great to work with.

    Eric B. –

  10. Samuel Kelly SK Cabinetry –

    This has been on my list to buy for a few years now, it is worth every cent! its so quite and the recovery time is beyond believable! i would defiantly recommend this to everyone! thank you Megan for your wonderful customer service !

    Samuel Kelly SK Cabinetry –

  11. Bob Zarrilli –

    Outstanding service and equipment! My third purchase over the past 5 years to include 2 piston compressors and a 58 cfm refrigerated air dryer. Recently purchased my second Polar Air 80 gallon 2-Stage Piston Air Compressor which features 10hp, single phase, silent technology, and auto drain which without question runs quieter than other units I’ve used and keeps up with my media blasting and powder coating with no issues. I Highly recommend their products which are offered at a GREAT Value! Thank you again Matt and Eaton!!

    Bob Zarrilli –

  12. Steve D. –

    I’m very happy with the purchase. Needed to downsize from a big 25 hp rotary for my smaller shop and needed a single ph. Capable compressor. This compressor is awesome and allows use of air sanders and spraying at the same time and keeps up.

    Steve D. –

  13. Ivan Ribic (verified owner) –

    I’m thoroughly impressed with Eaton’s products and customer service. This 10hp single phase is an incredibly quiet compressor, far beyond my expectations. I can have a phone conversation while standing right next to it! Constant run function is a great feature and the auto-drain is helpful too. Wish I would have bought it years ago.

    Ivan Ribic –

  14. Mike Rappaport –

    I am very happy with this unit. It is fast, quiet and very reliable. Customer service is and follow up on my order was excellent.
    Thank you

    Mike Rappaport –

  15. Brandon W. –

    Really happy with my purchase. I don’t think a time will ever come when this compressor won’t be enough. It’s an extremely capable machine that produces an insane amount of air very quickly. I will say that it is extremely quiet compared to standard compressors and you can talk next to it without really yelling, but any level of “I can have a phone call next to it” seems like a stretch. It’s not silent by any means but the biggest impact is the lower RPM. This cuts down on high frequencies which is really where the benefit is.

    I had trouble with the final destination shippers and my box was a bit beat up when it arrived. As a result (I believe), the pressure switch wasn’t functioning properly. It did take a moment to get someone to help diagnose it (they seemed pretty busy) but once that was done, they shipped a new switch out immediately and got me up and running. I’d say that I would purchase again but my grandkids will be fighting over it in 50 years so no day will come when I need to.

    Brandon W. –

  16. Tom Wojtaszczyk –

    In 2018 I searched for a good compressor for myself and found and purchased a 5HP Polar Air Compressor. I am very particular about buying quality personally. I am part of the team at Larry Romance and Son and when they need something, I am in a position where they knowing how particular I am about quality, will ask for my input. Thus, this opportunity of needing a good-sized compressor came up for our tire division. It is awesome!!! It is so quiet. We are very happy with it. Quality shows in every aspect of it !!! About a year ago we had an immediate need for our main shop and they bought locally. I knew we wouldn’t be able to buy one from you considering the lead time. It is LOUD and sounds like a giant sewing machine !!! Great Job Eaton !!!

    Tom Wojtaszczyk –

  17. Daniel Mejias –

    In 2024 I decided to look for a well made powerful air compressor. I came across the polar air 10hp 2 stage 80 gallon air compressor. I did my homework on the air compressor and was very impressed with how quiet and powerful it is. I purchased the air compressor for my small engine repair business and boy am I glad I did. This air compressor is quiet, plenty of cfm for my needs and is a rock solid compressor. If you are in the market for an air compressor, look no further. Eaton has you covered.

    Daniel Mejias –

  18. George Day –

    I recently purchased the 10 hp single phase Industrial Plus unit from the good folks in Clayton, Ohio and first and foremost, I must complement their sales and support staff. Everyone I spoke with was/is knowledgeable, competent, polite, and well-prepared to meet the needs of their clientele. The support behind the unit speaks to the quality and dependability of the unit before it is ever un-crated. Further, I was able to install a (likely) larger unit than may have been required at this time, but Eaton’s pricing structure and the quality of the build make it easier to afford the additional capacity now at a lower price point. Every part of the unit features first quality parts and first quality workmanship. The fit and finish indicate the unit is as well-built as it is well-designed. The unit is quiet, starts easy, runs at low speed, and never starves the distribution system for air. I have been involved with the design, installation, and use of these systems for well over forty years, and can recommend this equipment and this supplier with the highest degree of confidence.

    George Day
    Versailles, KY

    George Day –

  19. Dale Lemminger –

    after doing some research I contacted Eaton compressor for more information about their 10 hp quiet air compressor. I was impressed with the knowledgable courteous staff and selected the Polar air 10hp industrial plus unit for my home shop. the unit came packaged well and is a well built unit. After installation I fired it up and was impressed with how quiet and smooth it runs from my old 7.5 hp devilbuss compressor. I highly recommend this unit and look forward to years of quiet use.

    Dale Lemminger –

  20. John Cazares –

    I have had this exact compressor for well over a year,it runs flawless and is so much quieter than my last compressor, I love it

    John Cazares –

  21. Mike –

    This compressor os a hige upgrade from my previous husky. It can easily keep up woti a sand blaster and multiple air tooks tust run continuously. For the price though, i do wish that the electric box was better secured as it vibrates quite a lot and reauired me to add a third bolt to mount it more secirely. Additionally it would be nice if it came with the hour meeter already installed instead of requiring a seperate purchase and customer install, Especially since oil change intervals are based on hours.

    The unit also came low on oil Requiring me to purchase my own. ThenThen after about two hours of runtime, the oil pressure dropped below the minimum so I had to adjust this up to keep it at the rated 20 psi. ThThe belts also started flaking small bits of rubber off of them, though they do look to be at the correct tightness and in alignment. I reached out to customer service and was able to get a new pump under warranty which I’m hoping will fix these issues. For all of the problems I’ve had, they have stood behind their product with good customer service, which is appreciated.

    Mike –

  22. Mike Stitz –

    Nice COMPRESSOR but comes with some drawbacks. OVERALL, this COMPRESSOR is a beast and boasts a duty cycle I’ll likely not ever exceed but there were some DISAPPOINTMENTS upon RECEIPT. First, the compressor arrived about 1/2 quart low on oil. Since this requires oil not readily AVAILABLE off the shelf, i had to purchase this out of pocket before I even ran the unit. Secondly, MAINTENANCE is calculated by hours, but an hour meeter is an extra charge, and requires the customer to install. For the 5k price tag, it would be nice to have this as standard EQUIPMENT. Third, the oil pressre dropped so low after the first two hours of use that i had to manually adjust it twice, resulting in a 60psi cold start, and a 15 PSI pressure when at operating temp. Upon bringing this to customer service, a new pump was sent and will be installed under warranty so that is technically resolved. Lastyl, the pressure switch was set too low so that continuous run feature didn’t RELIABLY operate. This took a while to get to the bottom of but I Finally found the cutin/cutout pressure had been set at 100PSI/140PSI.
    Overall, all of these issues could have been take care of it the unit was test run before shipment and its DISAPPOINTING that none of these were addressed before I received the unit. Its OBVIOUS to me that some QA improvements are needed before certifying for shipment.

    Mike Stitz –

Related products