1200 CFM Refrigerated Air Dryer - Arctic Green Series
1200 CFM Refrigerated Air Dryer – Arctic Green Series PDRCF4601200
- For Use with 200 – 250 HP Air Compressors
- PLC Display
- Purifies compressed air by chilling to condense moisture
- High Refrigerant Safety
- Condensate is drained carrying oil and dirt particles away from the air
- Auto Drain system – eliminates the need for daily maintenance
- Outlet air baffle heater – prevents condensation on outlet air piping
- Heavy duty steel cabinet
- Trouble free operation refrigerated air inlet inner cooler for high temp cooling
- Side mounted condenser & Fan Motor
- Environmentally friendly 134A refrigerant
- Pre-Plumbed 5 Micron Pre-Filter 0.01 Micron Active Coalescing Filter
- Quick, Easy to Remove Cabinet Door for Easy Servicing – No Screws!
All air compressors produce condensation (water) without an air dryer in place. Water condensation in your air supply lines can be very frustrating. It can create downtime and cause damage to your Air Tools, CNC Machines, Laser/Plasma Cutting, Paint Booth and many other items that require dry compressed air in the workplace. The added cost of repairs from water damage can far exceed the cost of a new air dryer system over time.
IMPORTANT TO NOTE: When shopping for refrigerated air dryers, pay attention to the DEW POINT specifications, when making a comparison. While some of our competitors have dew points of 50 degrees, our refrigerated air dryers have a much lower dew point, at 35 degrees. This is incredibly important and here’s why: our refrigerated air dryers, with a dew point of 35 degrees will remove 47.5% more moisture from the air, at 100% humidity, than a dryer whose dew point is 50 degrees. The lower dew point of our refrigerated air dryers means that our dryers will prolong the life of your equipment, by removing more moisture.
Polar Air dryers are refrigerated dryers that have low electric power consumption, along with low maintenance costs to operate. Polar Air (Arctic Green) refrigerated dryers circulate refrigerant R134A through a non-corrosive aluminum plate heat exchanger. As the hot compressed air enters the heat exchanger of the dryer, it is cooled to a 37/40-degree dew point. The cool refrigerant absorbs the heat from the compressed air. The hot gas refrigerant is then cooled through the condenser with cycling cooling fan. As the compressed air is cooled, the humidity in the air changes its form, from a gas state to condensate (water droplets). These water droplets are then collected in an internal water trap, which is built into the refrigerated air dryer, with a built-in automatic drain valve.
Polar Air dryers come equipped with a built-in inlet pre-filter 5 micron and an active coalescing filter 0.01-micron outlet filter. The inlet pre-filter and outlet filter include a built-in auto-drain. This makes the dryer plug and play. No extra expensive filters to buy and no extra plumbing to worry about. Just run a line from the compressor to the inlet of the dryer and run an airline out of the dryer to your shop. Then add electric power to the dryer and you are ready to use it.
Technical SpecificationsCompressor Information
CFM 1200 Compressor Style Air Dryer Product Weight (Lbs) Crated Weight 902lbsMotor Information Voltage 60HZ 460 AMP Draw 23 Phase 3Air Dryer Information Dew Point (degrees F) 37-50 Pipe Size: Inlet & Outlet (inches) 3″ Max Ambient Temperature (degrees F) 120 Refrigerant Type R-134A Max Rated Inlet Temperature (degrees F) 150Additional Information Certification UL/CSA